Energy Saver Plus
The Economic Way to Heat Your Home
Unlike a conventional system where radiators are connected to a common flow and return, the Energy Saver Plus is a manifold system allowing each radiator to have its own individual hot water supply. Energy saving electrical controls can then be installed, enabling the user to set time and temperature control in each room to suit individual use.
The room thermostats are linked back to a Speedfit Wiring Centre that in turn will open or close the actuator valves on the manifold, giving every room or zone independent control of time and temperature. The Wiring Centre will also turn the boiler and system pump on in response to a demand for heat from an individual room or thermostat.
System Components
Manifolds
Speedfit Manifolds are available up to12 zones and are preassembled on wall brackets. Connections between pipe and manifold are Speedfit Push Fit and Flow and return rails are off set and angles can be altered, making for easy installation.
Electrical Controls
Speedfit offers a wide selection of electrical controls including Programmable and Digital Room Thermostats. A non-electrical probe is available for use where an electrical device could causes issues.
Fittings and Pipe
Speedfit offer a full range of push in fittings and pipe to cover any plumbing or heating situation. All fittings and pipe are certified BBA and WRAS and Kitemarked to BS7291 Parts 1, 2 & 3, Class S.
Enclosed
Top Left Image: Only 1 room is satisfied and Energy is still being wasted.
Top Right Image: Energy Saver Plus make a considerable reduction in energy use.